Dell EMC CX300

Beschreibung Storage capacity
Up to 18TB raw storage capacity with Fibre Channel drives;
Up to 38TB with high capacity SATA drives
Scalability
Up to 3 disk array enclosures (DAE2P and DAE2-ATA; The DPE supports up to 15 Fibre Channel drives.
Each DAE holds 15 drives.);
Up to 60 drives in the storage array
Cache
2GB
RAID levels
RAID 0, 1, 1/0, 3, 5 and 6
Supported servers
All dual and quad socket Dell PowerEdge servers;
Variety of Compaq®, HP®, IBM® and SUN® servers as validated by EMC
OS support
Linux,® Solaris,Microsoft Windows 2000 Server, Windows Server™ 2003,™ VMware,® AIX, HP-UX
Number of supported hosts
Up to 4 direct attached HA (redundantly connected) servers;
Up to 64 HA SAN connected serversFront end
Connectivity
Four 2Gb Fibre Channel ports per array (two per Storage Processor)
Drive interface
Dual, independent FC-AL interface ports on each drive;
Failover from each storage processor to the fibre channel loop is possible
Drives available
Fibre drives:
73GB 15k RPM disk with 2Gb Fibre Channel interface;
146GB 10k RPM disk with 2Gb Fibre Channel interface;
146GB 15k RPM disk with 2Gb Fibre Channel interface;
300GB 10k RPM disk with 2Gb Fibre Channel interface;
300GB 15k RPM disk with 2Gb Fibre Channel interface;
500GB 7200 RPM SATA disk (in DAE2-ATA)
750GB 7200 RPM SATA disk (in DAE2-ATA)
Available software
EMC SAN Copy/E ™, and
Access Logix™. EMC PowerPath™ is bundled with the array
Dimensions
3U Rackmount Processor Chassis with 1U Standby Power Supplies (standard NEMA 19-inch rack)
Height: 6.83 in. (17.36 cm) 4 EIA units
Width: 17.72 in. (45.0 cm)
Depth: 23.75 in. (60.38 cm)
Weight: 164.1 lb. (74.6 kg) max.
Rackmount 2Gb Fibre Channel Point-to-Point Disk Expansion Chassis (DAE2P)
with Dual Power Supplies
Height: 5.25 in. (13.33 cm) 3 EIA units
Width: 17.72 in. (45.0 cm)
Depth: 14.00 in. (35.36 cm)
Weight: 68 lb. (30.9 kg) max. configuration